Challenger5 (ECU only)

Challenger5 (ECU only)

612,26 € tax incl.*

* For professionnal discounts, or
for professional tax excl. purchases
inside European Economic Community,
please contact us

The Challenger5 has been designed for those who want to conquer thanks to an ultra modern ECU. It allows managing 1, 2 or 4-cylinder aspirated or turbocharged engines in semi-sequential injection and lost sparks ignition.

Thanks to its high performance microprocessor (calculates in 32 bits while many other brands calculate in 8 or 16 bits) the Challenger5 allows to get astonishing accelerations.

Two tunings can get along for the same engine (multimapping). The desired tuning can be selected while running, by a dashboard switch, allowing the adaptation to the driving conditions, a super boost of the engine if necessary.

Selection of hard cut or soft cut RPM limiter. The hard cut limiter allows a modification of ignition advance and injection time for a machine gun limiter with burst of flames.

 An exhaust bang is done at the end of sequential gear shifting because the normal ignition advance is recovered with a slope allowing to avoid jolts in the transmissions.

A full self-learning function allows the ECU to auto tune its injection time map when equipped with a Lambda sensor (needs a professionnal license, or on option with standard license).

• 2 injection channels (semi sequential injection)
• 2 ignition channels (lost spark ignition)
• 3 fully programmable auxiliary outputs (rpm or temperature relays, ON-OFF camshaft, advanced working ...)
• fuel pump management according to FISA regulation
• RPM sensor selectable Hall effect or inductive on crankshaft flywheel
• 1 internal power supply tension measurement
• 4 resistive inputs NTC-PTC or logical
• 4 analog 0-5 volts inputs
• 1 selectionnable analog-resistive input
• 1 differential 0-5 volts input

For a fast tuning, the maps of engine start, engine temperature rise, accelerating pumps and atmospheric altimetric pressure and intake t° corrections are preset for the ignition advance as for the injection.
The PID of devices commands (turbo, air intake proportional electrovalve) are also preset.

Advanced engine management functions allow a total optimization of the engine working:
• Full self-learning of injection time map with display of learning instantaneous quality
• Continuous survey of richness by Lambda sensor (wideband or 0-1 volt)
• Altimetric and/or dynamic pressure correction

• Rpm limiter on injection or ignition or both together or one after the other
• Soft cut or Hard cut limiters selectable
• Several launch limiter and race limiters, selectable by a rotator (rotary switch) at the vehicle board
• The different launch limiters allow to adapt to the road grip conditions
• Tunable gradual limiter raising from launch limiter to race limiter to avoid wheels slipping at vehicle take-off
• Injection time and ignition advance correction during launch procedure to get high turbo pressure for a cannonball take off
• Soft cut limiter: gradual cylinder per cylinder cutoff, and turning (always begins the cutoff sessions with a different cylinder to avoid always heating the same cylinder)
• Hard cut limiter: all the cylinders are cutoff at the same time, with tunable hysteresis to uncut the cylinders with tunable modification of ignition advance and injection time for a machine gun limiter with burst of flames

• Traction control by engine acceleration monitoring in function of the gear position

Sequential gearbox management or specific management of robotized gearbox.
• Logical or analog switch (strain gauge) with definition of the triggering thresholds
• The order of gears can be automotive type, motorcycle or special
• Intervention time in function of gear position and engine speed
• Intervention at gear upshift on ignition by cutoff and/or advance modification with slope of return to normal (transmissions protection generating bang and exhaust flame)

• Turbo management by intake pressure control
• Management of wastegates with back pressure
• Pressure target tunable according to rpm and throttle (or pedal) position
• Pressure target multimapping
• Bang-bang (antilag system) at the starting up for cannonball launch
• Bang-bang managed with proportionnal air electrovalve or mecanical throttle opening device
• Bang-bang disabling by dashboard switch for road driving

• Every measure has a customizable digital filtering
• For every measure, it is possible to define a strategy of detection of defect, a strategy of replacement value in case of defect, or to use the standard strategies supplied by the ECU
• Wideband or 0-1 volt Lambda sensor

Extremely flexible strategies allow to multiply the possibilities of tuning:
• Two selectable possible engine tuning by vehicle board switch (for example multi fuels, additives, super boost of turbo pressure, ...)
• Addition of engine devices

A completely programmable auxiliary CAN-BUS (11 and 29 bit identifiers, speed until 1 Mbits) allows to send desired data to the others connected nodes, data recording or dashboard.

3 completely programmable auxiliary outputs.
They can be configured in On-Off (programmable hysteresis), PWM from 10 to 10000 Hz or angular (engine synchronous) commands, with adjustable cyclical ratio (and phase), and piloted by any combination of parameters known by the ECU.
It is for example possible to command in ON-OFF, PWM or synchronously with the engine external devices in function of the state of the multimapping switch, race switch, or throttle position, engine rpm, temperatures, limiter type, ...

• ECU in automotive housing


Documentation download

top of page

    ECUs options

    Some features of the ECUs are in option. You will find them here, alone or with accessories.


    Challenger5 injection self-learning function Add to cart  181,50 €  

  • Challenger5 injection map self-learning function
  • Challenger5 ECU is able to fill by its own its injection time map, geatly facilitating the engine tuning. This feature is an option that is to be purchased separately from the ECU.



    Challenger5 self-learning and LSU49-5 kit Add to cart  425,92 €  

  • Challenger5 injection map self-learning function
  • Challenger5 ECU is able to fill by its own its injection time map. This feature is an option that is to be purchased separately from the ECU. This kit adds a LSU49-5 controller and its wide band Lambda sensor to the self-learning option.



    ECUs accessories

    ECUs accessories


    Rotator for Challenger and Meteor ECUs Add to cart  94,38 €  

  • Rotator for Challenger5
  • 4-position rorary switch for Challenger end Meteor ECUs