Commander660 (complete kit)

Commander660 (complete kit)

3 239,17 € tax incl.*

* For professionnal discounts, or
for professional tax excl. purchases
inside European Economic Community,
please contact us

The Commander660 ECU is the new version replacing the Commander66 ECU (which is no more manufactured). It owns a twice as much memory size which allows supplementary calculations, larger maps, and an improved security of the CAN-Bus transmissions.

The Commander660 has been designed for those who want an exceptional ECU. It allows managing 1 to 6-cylinder engines in sequential injection and static ignition, and 8, 10 and 12-cylinder engines in semi-sequential injection and lost sparks ignition. It can manage straight engines and 'V' engines as well, with a separated management for each bank of cylinders (intake, Lambda, turbos and camshafts for each bank).

Thanks to its high performance microprocessor and its multiple possibilities the Commander660 allows to get astonishing accelerations by a total engine optimization.

Several tunings can get along for the same engine (multimapping). The desired tuning can be selected while running, by a rotator or a dashboard switch, allowing the adaptation to the driving conditions, a super boost of the engine if necessary.

A full self-learning function allows the ECU to auto tune its injection time map when equipped with a wide band Lambda sensor (needs a professionnal license, or on option with standard license).

• 6 injection channels (sequential injection, semi sequential or direct inductive and direct piezo)
• 6 ignition channels (static ignition or lost spark)
• 7 fully programmable auxiliary outputs (including fly by wire management, proportional camshafts drift, FISA regulation fuel pump, ...)
• RPM sensor selectable Hall effect or inductive on crankshaft flywheel
• Main phase sensor selectable Hall effect or inductive on camshaft flywheel
• Auxiliary phase sensor selectable Hall effect or inductive on camshaft flywheel
• 1 internal power supply tension measurement
• 8 resistive inputs NTC-PTC-PT200 or logical (of which 4 by CAN-BUS connection)
• 13 analog 0-5 volts inputs (of which 4 by CAN-BUS connection)
• 2 selectionnable analog-resistive inputs
• 1 logical input
• 8 speed inputs fully programmable (of which 4 by CAN-BUS connection), Hall effect or inductive selectable, number of teeth from 1 to 128

For a fast tuning, the maps of engine start, engine temperature rise, accelerating pumps and atmospheric altimetric pressure and intake t° corrections are preset for the ignition advance as for the injection.
The PID of devices commands (electric throttle, air intake proportional electrovalve, turbo) are also preset.

Very advanced engine management functions allow a total optimization of the engine working:
• Cylinder by cylinder correction of injection and ignition
• Assignment cylinder bank by bank for 'V' engines
• Correction of richness by wideband Lambda sensor specific for each cylinders bank
• Capability to use one intake pressure by cylinders bank
• Operation in two injection rails with gradual shifting from one to the other
• Proportional positioning of camshafts
• Fuel pressure management
• Injection correction by fuel pressure
• Management of the electric throttles (with specific tuning allowed by gear position)
• Direct injection engine management (see direct injection kits)
• Multi fuels and additive management

• Rpm limiter on injection or ignition
• Cylinder per cylinder cutoff with rotation of the first cylinder cutoff (engine protection)
• Modifiable rpm limiters following gear position, intake temperature or engine temperature or elapsed time in limiter
• Several launch limiter and race limiters, selectable by a rotator (rotary switch) at the vehicle board
• The different launch limiters allow to adapt to the road grip conditions
• Tunable gradual limiter raising from launch limiter to race limiter to avoid wheels slipping at vehicle take-off

Sequential gearbox management or specific management of robotized gearbox.
• Logical or analog switch (strain gauge) with definition of the triggering thresholds
• The order of gears can be automotive type, motorcycle or special
• Intervention time in function of gear position, rpm and engine torque
• Intervention at gear upshift on ignition by cutoff and/or advance modification with slope of return to normal (transmissions protection generating bang and exhaust flame)
• Engine automatic acceleration (autoblip) at downshift

The proportional positioning can be made on one or two camshafts.
• 2 intake camshafts for 'V' engines
• intake and exhaust camshaft for straight engines
The proportional positioning is executed in PWM with
• 1 electrovalve for each camshaft for standard management
• 2 electrovalves for each camshaft for BMW M3 type management (one for advancing and one for delaying)*
The camshafts targets can be:
• on state mark
• on position mark
• on one missing tooth
• on regular teeth (exhaust only)
*We thank the Company Mecapower (Vilobi-Spain) for its help in the development of the management of BMW Vanos

The turbo management is made by the PWM command of a pneumatic electrovalve of leak or a variable geometry. Wastegates with back pressure are also managed.
• 1 turbo
• 2 twin turbos in parallel (1 by bank of cylinders)
• 2 sequential turbos in parallel
• 2 staged sequential turbos
• 3 turbos, with two in parallel and the third serial with both first ones
Turbos in sequential mode are started only under selectable conditions.
• Turbo management in pressure or in turbo rpm or both with dynamic choice of the type of management.
• For 'V' engines with intake separated by bank, it is possible to read 2 pressure sensors, each allocated to a bank of cylinder, to manage each of the twin turbos with its own pressure.
• Turbo protection by turbo rpm limitation
• Management of wastegates with back pressure
• Pressure and turbo rpm target tunable according to gear position, exhaust or intake or engine temperature, altimetric pressure
• Bang-bang (antilag system) at the starting up for cannonball launch
• Bang-bang managed with fly by wire, proportionnal air electrovalve or mecanical throttle opening device
• Bang-bang monitoring by exhaust temperature
• Bang-bang disabling by dashboard switch for road driving
• Programmable injection of water

See Direct injection inductive kit and Direct injection piezo kit.

• Programmable reaction (by limitation of torque, rpm, or engine cutoff) on problem of oil pressure, engine temperature, turbo pressure, with alarm lights and recording of the defects

• Every measure has a customizable digital filtering
• Every measure maybe assigned by calibration to a physical input of the ECU, to a calculated value (ie double potentiometers), or to a CAN-BUS sensor
• For every measure of the ECU, it is possible to define a strategy of detection of defect, a strategy of replacement value in case of defect, or to use the standard strategies supplied by the ECU
• Turbo speed, wheels speed
• Wideband Lambda sensor
• Oil pressure, fuel pressure, oil t°
• Exhaust temperature by thermocouple module or PT200

Extremely flexible and simply programmable strategies allow the motorist to multiply the possibilities of tuning
The use of these advanced functions and the development of specific strategies does not require either the learning or the knowledge of a programming language. The innovative and natural technique, called SKYMCOD Mapped programming, developed by Skynam, performs this role.
For example,
• Several selectable possible engine tuning by rotator or by quite other condition chosen by the motorist (for example multi fuels with programmable switching, additives)
• Addition of engine devices (intake flaps, exhaust throttle)
• Programmable auxiliary inputs for new measurements creation
• Management of restrictor pressure for overboost engines
• Programmable injection of water
• Limitation of acceleration or vehicle speed
• The ECU can react to the oil temperature or to the oil pressure according to the rpm or to quite other parameter or the combination wished to control, activating alarms or switching off the engine, or changing the strategies of injection, ignition, overboost, command of the electric throttle, or other
• The motorist can intercept all the targets of the Commander (injection, ignition, turbo pressure, bang-bang, fuel high pressure, proportional positioning of camshaft, richness correction, rpm limiter, motorized throttle) and modify them with his appropriate strategies

A completely programmable auxiliary CAN-BUS (11 and 29 bit identifiers, speed until 1 Mbits) allows to exchange data with the others connected nodes, car manufacturer devices or data recording or dashboard. The received data can be used in the advanced functions of calculations and developments of strategies.

7 completely programmable auxiliary outputs.
They can be configured in On-Off (programmable hysteresis), PWM from 10 to 10000 Hz or angular or engine synchronous phased commands, with adjustable cyclical ratio (and phase), and piloted by any combination of parameters known by the ECU, including the values received from the auxiliary CAN-BUS, andor from the sophisticated strategies developed by the motorist and fully configurable PIDs.

• ECU in automotive housing or
• ECU in racing housing with military type connector
* Price displayed automotive version


Documentation download

top of page


• The kit is made of the Commander660 ECU supplemented with accessories to install it on the engine. The kit we provide is specifically designed for 6-cylinder engines with full monostatic ignition and sequential injection.
If your engine has a higher number of cylinders, you maybe need to purchase some complementary accessories.
In any case, report to kit complements below to verify your needs

• The CAN-BUS connection-to-PC kit is not included in the ECU kit. It is to be ordered in option or to be purchased separately. It is essential to be able to connect your PC to the Commander ECUs and tune the engine.



Commander660 ECU
Engine loom*
Air temperature sensor
Water temperature sensor
3 ignition modules two ways (mono static injection 6-cylinder)
Connectors kit








Semi finished loom
This loom is pre-wired on the ECU side connector, with sensors and actuators connectors not installed.
Its length is to be adapted when intalling on the vehicle, then the sensors and actuators connectors will be wired.
• The connectors of the standard sensors* and standard actuators* that are delivered with the kit are provided.
• The various branches of the loom are labeled (grounds, power supplies, measurements, auxiliary commands, injectors, ...) but not sheathed. High quality canvas adhesive tapes are provided to finish the sheathing when installing.

Finished loom
As every application is different, there is no standard finished loom:
You have to contact the Skynam technical service to detail the complete making of your loom (see contact page).
• The loom is completely sheathed with braid sleeving.
• The lengths of the various branches are standard (2 meters) or customized (lengths provided to Skynam).
• The connectors of the standard sensors* and standard actuators* are installed.
• The connectors of the other sensors and actuators are to install or are to provide to Skynam.
• The fuses and relays bases are installed if required.

*Standard sensors :
These are the sensors that belong to the engine accessories list.
• water and air temperature sensors,
• atmospheric and intake pressure sensors,
• temperature and pressure sensors of oil and fuel

*Standard actuators:
These are the actuators that belong to the engine accessories list.
• gazoline injectors,
• ignitions coils


The connection kit is to be ordered in option or can be separately purchased.
It is essential to be able to connect your PC to the Commander ECUs and tune the engine. The CAN-USB interface is the same for all Commander ECUs (gasoline and diesel).

CAN-USB PC-ECU interface*




*Skynam uses a Lawicel interface specifically designed. The other CAN-USB interfaces (even other Lawicel) found on the market cannot work with Winjall. More, this special interface is equipped with an enhanced protection against electromagnetic spikes emitted by the engines.


You can download the installation CDROM parts from the Skynam website.

Detailed installation instructions
Winjall tuning software with User's Manual
ECU software pack with detailed documentation
Injection and advance base maps to start the engine







The kits we propose are specific to 6-cylinder engines with full monostatic ignition and sequential injection. To use them with a higher number of cylinders, you will need some complementary accessories.

Here are the main types of ignition you can manage:

Distributed ignition (1 ou 2 coils with distributor) :
Uses 1 single ignition module or 1 dual igition module (included in the kit).

4-cylinder engine lost spark ignition (2 dual coils) :
Uses 1 dual ignition module (included in the kit).

4-cylinder engine monostatic ignition (4 single coils) :
Uses 2 dual ignition modules (included in the kit).

5-cylinder engine monostatic ignition (5 single coils) :
Uses 3 dual ignition modules (included in the kit).

6-cylinder engine lost spark ignition (2 triple coils or 3 dual coils) :
Uses 2 dual ignition modules (included in the kit).

6-cylinder twin plugs engine lost spark ignition (6 dual coils) :
Uses 3 dual ignition modules (included in the kit).

6-cylinder engine monostatic ignition (6 single coils) :
Uses 3 dual ignition modules (included in the kit).

6-cylinder twin plugs engine monostatic ignition (6 dual coils) :
Uses 3 dual ignition modules (included in the kit).

8-cylinder engine lost spark ignition (4 dual coils) :
Uses 2 dual ignition modules (included in the kit).

8-cylindres engine monostatic ignition (8 single coils) :
Uses 4 dual ignition modules (from which 3 included in the kit).

10-cylinder engine lost spark ignition (5 dual coils) :
Uses 3 dual ignition modules (included in the kit).

10-cylindres engine monostatic ignition (10 single coils) :
Uses 5 dual ignition modules (from which 3 included in the kit).

12-cylinder engine lost spark ignition (6 dual coils) :
Uses 3 dual ignition modules (included in the kit).

12-cylindres engine monostatic ignition (12 single coils) :
Uses 6 dual ignition modules (from which 3 included in the kit).

For complementary details, report to the installation notice included in the software Pack that you can download from our site.


Top of page